Flexitron Webdyn SunPM - Page 101

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
101
The concentrator can also store data locally on an SD card, for this you must select in the “SD card”
interface:
The choice of the type of server or the SD Card interface modies the parameters to be entered. The
server settings remain the same.
Server 2 is only used to back up congurations. Only server 1 manages the synchronization of
conguration les. The MQTT/MQTTS/MQTTS AWS IOT/MQTTS Google Cloud IoT/MQTTS Azure IoT Hub
is only available on server 2 (backup).
To verify that the server conguration is correctly congured, it is advisable to click on the “Connect”
button. A window with the connection log is displayed, allowing you to see all the les exchanged between
the concentrator and the remote server. The last line allows you to quickly know if the connection went
well or if a failure occurred.
Stopping the current connection by pressing the “Abort” button is not immediate, the stop occurs between
two actions. If an action is in progress, it must end rst. An action corresponds to each line described in
the connection log.