Flexitron Webdyn SunPM - Page 113

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
113
Type SERVER2_Type Choice of server protocol:
•MQTTS: secure MQTT server
Address SERVER2_Address IP address or server name
Port MQTT2_Port MQTTS server port (default 8883)
Login MQTT2_Login Username used by the hub to connect to
the MQTTS server
Password MQTT2_Password Password used by the concentrator to
connect to the MQTTS server
Timeout (s) MQTT2_Timeout Maximum wait time in seconds for the
response from the MQTTS server. If the
server has not responded within the
allotted time, the send is stopped and
retried on the next schedule.
TLS version MQTT2_TlsVersion TLS version supported by the MQTTS
server. The possible values are:
•TLS v1.1
•TLS v1.2
Insecure MQTT2_Insecure Disable verication of the host name
specied in certicates. The possible
values are:
•Unchecked: Verication enabled
•Checked: Verication disabled.
SunPM
certicate
MQTT2_CertFile Name of the hub-specic certicate
used for the connection. The certicate
is to be retrieved from your MQTTS
server and must be imported to the
concentrator by FTP or by the web
interface.
SunPM Private
Key
MQTT2_KeyFile Name of the le including the private
key specic to the concentrator used for
the connection. The le is to be retrieved
from your MQTTS server and must be
imported to the concentrator by FTP or
by the web interface.