Flexitron Webdyn SunPM - Page 117

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
117
Port MQTT2_Port MQTT server port (default 8883)
Timeout (s) MQTT2_Timeout Maximum wait time in seconds for the
response from the MQTT server. If the
server has not responded within the
allotted time, the send is stopped and
retried on the next schedule.
Functional only in QoS 1 or QoS 2.
SunPM
certicate
MQTT2_CertFile Name of the hub-specic certicate
used for the connection. The certicate
is to be retrieved from your MQTTS
server and must be imported to the
concentrator by FTP or by the web
interface.
SunPM Private
Key
MQTT2_KeyFile Name of the le including the private
key specic to the concentrator used for
the connection. The le is to be retrieved
from your MQTTS server and must be
imported to the concentrator by FTP or
by the web interface.
Amazon root
CA certicate
MQTT2_CaCertFile Name of the certicate used to
authenticate the specied MQTTS
server. The certicate is to be retrieved
from your MQTTS server and must be
imported to the concentrator by FTP or
by the web interface.
Client Id MQTT2_ClientId Customizable identier of the equipment
on the MQTT server.
Keepalive (s) MQTT2_KeepAlive If no exchange made with the MQTT
server for the time dened in seconds,
the concentrator sends a ping to the
MQTT server in order to verify the
connection to it.
If the value is “0”, KeepAlive is disabled.
If the hub is in persistent connection
mode with the MQTT server and a
disconnection is detected after a
KeepAlive, the hub will automatically
reconnect to the MQTT server.
Data topic MQTT2_Topic Name of the topic for the data deposited
by the concentrator.