Flexitron Webdyn SunPM - Page 122

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
122
Command
subfolder
MQTT2_ControlTopic Name of the topic for the commands to
be retrieved by the concentrator.
The MQTT2_ResultTopic parameter must
be populated for using commands.
If a topic name is entered, the
concentrator remains in permanent
connection mode with the MQTTS server.
Result
subfolder
MQTT2_ResultTopic Name of the topic for the results of the
commands passed to the concentrator.
The MQTT2_ControlTopic parameter
must be populated for using commands.
If a topic name is entered, the
concentrator remains in permanent
connection mode with the MQTTS server.
Alarm
subfolder
MQTT2_AlarmTopic Name of the alarm topic to be published.
If the eld is empty, no alarm will be
published to the broker.
If a topic name is entered, the
concentrator remains in permanent
connection mode with the MQTTS server.
The Google Cloud IoT MQTTS is only available on server 2 (backup).