contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
• Press the “Download and apply the new rmware” button.
• Follow the update progress in the window that opens:
• Please wait while the update is applied and the concentrator restarts.
• Refresh the web page (F5 key on the keyboard).
• Connect back to the concentrator (see section 3.2: “Embedded web interface”).
• Go back to the concentrator’s “Upgrade” page.
• Check that the new version is shown in the Firmware version eld.
• The concentrator has been updated.
Do not disconnect the concentrator and avoid operations on it during its update.
If an error occurs during the update, the concentrator will keep its previous operational rmware.
In that case, repeat the update procedure exactly as indicated.
To Next Page
Loading...
Need help?
General