Flexitron Webdyn SunPM - Page 153

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
153
A “Power OFF” alarm is sent following a power cut of at least 10 seconds and a “Power ON” alarm is sent
once the power supply has returned for at least 1 minute. The other alarms have no timers and are sent
as soon as the concentrator detects them.
The alarm le on the server has the following format:
<uid>_AL_<timestamp>.csv.gz
Where:
• <uid>: Concentrator identier.
• <timestamp>: The timestamp format is “YYMMDD_HHMMSS” so that an alphabetical sort of
the directory gives the chronological order.
The GATEWAY type alarm le format is the following:
datetime_1;GATEWAY;info_1
datetime_2;GATEWAY;info_2
...
datetime_Y;GATEWAY;info_X
Colour code:
• Black: xed text.
• Blue: device-specic information or data.
Where:
• datetime_Y: alarm timestamp at trigger point Y. For the format, see variables FTP_
EuroDateFormat, FTP2_EuroDateFormat, HTTP_EuroDateFormat and HTTP2_EuroDateFormat
in section 3.2.2.5: “Servers”.
• info_X: Information on alarm X.