Flexitron Webdyn SunPM - Page 165

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
165
Color code:
• In green: Name or variable of the device or interface.
• In blue: Data that depends on the equipment or the interface.
• In black: Fixed text.
With:
• DAQ_Name_eqp_N: Name of device N, “Name” eld of the device in the <uid>_daq.csv le
(see chapter 3.1.2.1.3.4: “Declaration of devices”)
• DEF_Name_var_X_eqp_N: Name of variable X of equipment N, “Name” eld of the variable in
the denition le (see chapter 3.1.2.2.2: “Content of the denition le”)
• var_X_value_Z_eqp_N: Z value of variable X of equipment N collected at acquisition point Y and
at the action dened in the equipment N denition le.
• date: Time stamp of data at acquisition point Y in UTC+timezone (see the “NTP_TimeZone”
parameter in appendix A). In the Format: “YY/MM/DD-hh:mm:ss” for “Year/Month/Days-
Hours:Minutes:Seconds”
• timestamp: Timestamp of data at acquisition point Y in UTC+0. Number of milliseconds elapsed
since January 1, 1970.
In order to avoid sending unnecessary data to the server and thus optimizing the connection, it is
advisable to activate only the variables that you wish to upload.
Equipment (Modbus, inverters):
Example of an equipment data le with an acquisition period every 10 minutes:
• Parameterization of the indexes of device 1 (modbusTCP):
Index Code « Action » Display
1 1 Parameter value
2 0 No
3-11 4 Instant value
12 8 Instant value