Flexitron Webdyn SunPM - Page 69

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
69
Password: to secure access to the concentrator, we recommend changing the default
passwords following the rst conguration. Passwords are modied using the web interface
(see section 3.2.2.7: “Password”) or using the conguration le (see section 3.1.2.1.1: ““<uid>_
cong.ini” le”)
• The Home page is displayed:
The “Home” tab provides site and concentrator information as well as the general status of the
equipment, current alarms and communication errors.
At the top of the screen is the essential information of the site.
The “Device info” panel contains the list of congured devices with their status as well as a
list of errors detected on the various congured devices. Only the rst error is displayed. If new
errors occur, they are not displayed. The 3 possible statuses for equipment are:
The equipment has been found and the current conguration is functional
The equipment has been found but one or more variables in the denition le
are not functional
The device was not found or the current conguration is not functional