Flexitron Webdyn SunPM - Page 97

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
97
The modem parameters are:
WEB
INTERFACE
PARAMETER
<uid>_daq.csv
conguration le
DESCRIPTION
PIN code pin The SIM card PIN code to be entered if it has one
APN apn Your mobile operator’s APN name (required for an IP
connection)
Authentication
type
authentication Operator authentication type (optional depending on
the operator):
•None: no authentication
•PAP: PAP type authentication The login and
password must be entered below
Connection
identication
login Your mobile operator’s user name (optional
depending on the operator)
Connection
password
password Your mobile operator’s password (optional depending
on the operator)
Contact your SIM card provider to nd out what information to enter to congure the modem.
The PIN code status gives information about the SIM code which can be:
PIN CODE STATUS DESCRIPTION
PIN code OK The modem can access the SIM card. Either the SIM card PIN code is
correct or the SIM card has no PIN code
PIN code required The SIM card expects a code that must be entered in the “PIN code” eld
Unknown Miscellaneous modem errors
PUK code required The SIM card is locked due to too many incorrect attempted codes
SIM card not
inserted
There is no SIM card in the concentrator
If the SIM card has an activated PIN code and the PIN code entered into the concentrator is
incorrect, the SIM card can lock. It can be unlocked using a mobile phone using the PUK code provided
by the operator.