User interface
5
5.4 Quick menu
Figure 5.4 Quick menu
1. Storage status of the memory card.
2. Battery level.
3. Enable/disable Bluetooth or open the Bluetooth settings menu. See also section 14.2
Bluetooth.
4. Enable/disable Wi-Fi or open the Wi-Fi settings menu. See also section 14.1 Wi-Fi.
5. Enable/disable automatic upload of images and videos. See also section 14.3.5 Au-
tomatic upload.
Note If the camera is not paired with a FLIR Ignite account, you will be prompted to
sign in to FLIR Ignite before you can enable automatic upload.
6. Turn on/off the camera lamps.
Note Before you can turn on the camera lamps, you need to enable the lamps. On
the Settings menu, select Device settings > Lamp & laser > Enable lamp & laser or
Enable lamp & laser + Use lamp as flash.
7. Adjust the brightness of the screen.
8. The FLIR Ignite user account that the camera is paired with. For more information,
see section 14.3.4 Pair with FLIR Ignite.
9. Storage status of the FLIR Ignite account.
5.4.1 Navigation
To display the Quick menu, swipe down from the top of the screen.
To navigate the Quick menu by using the touch screen, do the following:
• Tap to enable/disable a function.
• Bluetooth and Wi-Fi: Tap and hold to open the settings menu.
• Screen brightness: Tap the screen to adjust the screen brightness.
To navigate the Quick menu by using the joystick, do the following:
• Move the joystick up/down or left/right to highlight a function.
• Push the joystick to enable/disable the highlighted function.
• Bluetooth and Wi-Fi: Push and hold the joystick to open the settings menu.
• Screen brightness: Move the joystick up/down to adjust the screen brightness.
#T810605; r. AD/92464/92464; en-US
13
To Next Page
Loading...
Need help?
General
