Camera settings
16
On the Settings menu, you can set up the camera according to your preferences and
view information about your camera.
The Settings menu includes the following:
• FLIR Ignite
• Connections
• Multi-Rec settings
• Camera temperature range
• Save options & storage
• Device settings
16.1 FLIR Ignite
Sign in to FLIR Ignite and view information about the FLIR Ignite account the camera is
paired with.
Enable/disable automatic upload of images.
For more information about FLIR Ignite and online storage of images, see section 14.3
Cloud connectivity.
16.2 Connections
Connect the camera to a Wi-Fi network or set up the camera as a wireless access point.
For more information, see section 14.1 Wi-Fi.
Pair the camera with a Bluetooth device. For more information, see section 14.2
Bluetooth.
Advanced settings for firewall, trusted applications, and streaming authentication.
16.3 Multi-Rec settings
Set up a recording sequence in different image modes (IR, HSM, Digital camera). For
more information, see section 12.3 Multi-Rec
16.4 Camera temperature range
The camera is calibrated for different temperature ranges. The available temperature
range options depend on the camera model.
What temperature range to select depends on the application (gas detection or tempera-
ture measurement) and the thermal conditions in the scene. For more information, see
section 7.2 Temperature range.
16.5 Save options & storage
• Inspection route: Activate and configure the Inspection Route function. See also sec-
tion 15 Inspection Route.
• Preview image before saving: Set up the camera to display a preview image before an
image is saved. See also section 11.1.1 Preview an image.
• Add annotation after saving: Set up the camera to display an annotation tool or the
Annotation menu. See also section 11.2 Annotate an image.
• Video compression: Storage format for video files.
◦ Mpeg (*.mpg): Mpeg recordings cannot be edited after the file has been saved.
#T810605; r. AD/92464/92464; en-US
78
To Next Page
Loading...
Need help?
General
