Measuring temperatures10
10.6.1 Set up a color alarm
To set up a color alarm, do the following:
1. Push the joystick or tap the menu button. This displays the main toolbar.
2. Select Color. This displays a toolbar.
3. On the toolbar, select a color alarm. This displays a dialog box where you can define
the settings for the alarm.
Settings for the Above alarm and Below alarm:
• Temperature limit
• Palette
Settings for the Interval alarm:
• Low temperature
• High temperature
• Palette
Settings for the Condensation alarm:
• Atmospheric temperature: The current atmospheric temperature.
• Relative humidity: The current relative humidity.
• Relative humidity limit: The relative humidity level at which you want the alarm to
be triggered. A relative humidity of 100% means that water vapor condenses from
the air as liquid water (= dewpoint). A relative humidity of about 70% or above can
cause mold.
Settings for the Insulation alarm:
• Indoor temperature: The current indoor temperature.
• Outdoor temperature: The current outdoor temperature.
• Thermal index: The insulation level (an integer between 0 and 100).
4. To close the dialog box, push the Back button.
#T810605; r. AD/92464/92464; en-US
55
To Next Page
Loading...
Need help?
General
