Updating the camera18
1. Make sure the camera battery is fully charged.
2. Download the FLIR update .zip file and save it in a suitable location on your computer.
3. Unzip the .zip file. You should find an update package file ending in .fuf or .run in the
zip archive.
4. Turn on the camera.
5. Connect the camera to the computer using the USB cable.
6. Open the folder Flir Camera > Internal > doupdate.
7. Copy the update package file (.fuf or .run) from your computer to the folder doupdate
in the camera.
8. The update process starts automatically.
The camera is unavailable during the update. When the update is completed, the
camera starts again.
Note Do not remove the USB cable until the update is completed.
#T810605; r. AD/92464/92464; en-US
85
To Next Page
Loading...
Need help?
General
