FLIR ThermaCAM P45

10.2.5.5 Power
10392703;a3
Figure 10.50 Power Setup dialog box
Figure 10.51 Explanations of the Power Setup dialog box
CommentsValueLabel
Move the joystick left/right to specify the time after
which the camera will be switched off if it is not
used.
■
None
■
10 min
Auto power off
Move the joystick left/right to specify the time after
which the display will be switched off if it is not
used.
■
None
■
30 sec
■
60 sec
Display power off
Move the joystick left/right to specify the level of
background illumination of the LCD.
■
Low
■
Medium
■
High
LCD illumination
➲ For protective reasons, the LCD will be switched off if the detector temperature
exceeds +60 °C (+149 °F) and the camera will be switched off if the detector temper-
ature exceeds +68 °C (+154.4 °F)
10.2.5.6 Status bar
10392903;a3
Figure 10.52 Status bar dialog box
Figure 10.53 Explanations of the Status bar dialog box
CommentsValueLabel
Move the joystick left/right to enable/disable this
label on the status bar.
■
On
■
Off
Date/time
10
96 Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
10 – Camera program