CommentActionTask
Press the joystick again
➲ Images will be stored sequentially in the current directory. If the
recording is stopped and then started again the new images will be
added at the end of the previous sequence in the same directory.
Stopping the recording
10.2.2.4 Voice comment
10389803;a3
Figure 10.10 Voice comment dialog box
Point to Voice comment and press the joystick to display the Voice comment dialog
box. A progress bar in the dialog box will indicate the progress of the voice recording.
Using the voice comment feature, you can:
■ listen to a recorded comment, make a pause, and then continue
■ record a new comment, make a pause, and then continue
■ edit a recorded comment, i.e. listen and/or add a comment at the end of the
recorded comment
■ overwrite an existing recording
Figure 10.11 Explanations of the Voice comment dialog box
ActionTask
Move the joystick to select the Record button and
then press the joystick.
Recording a new voice comment, using the head-
set
Move the joystick to select the Stop button and
then press the joystick.
Stopping the recording
Move the joystick to select the Play button and
then press the joystick.
Listening to a voice comment, using the headset
Move the joystick to select the Save button and
then press the joystick, or press the S button.
Saving the current voice comment
As a reminder to include important information about the infrared object in the voice
comment, you can display a checklist in an expanded voice comment dialog box.
You create this checklist in a simple text editor, save it as voicecomment.txt and
put it in the Images folder in the camera. When you open the voice comment dialog
box the next time, this checklist will be displayed. See the figure below.
10
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006 75
10 – Camera program
To Next Page
Loading...
Need help?
General
