10.2.5.9 Local settings
10393903;a3
Figure 10.58 Local settings dialog box
Figure 10.59 Explanations of the Local settings dialog box
ValueLabel
Configuration-dependent
➲ The camera program will be restarted when you change the lan-
guage. This will take a few seconds.
Language
■
NTSC
■
PAL
Video output
■
°C
■
°F
Temp unit
■
Feet
■
Meters
Distance unit
■
YYYY-MM-DD
■
YY-MM-DD
■
MM/DD/YY
■
DD/MM/YY
Date format
■
24 hour
■
AM/PM
Time format
10.2.5.10 Camera info
The Camera info dialog box shows information about memory usage, battery status,
serial numbers, software revision etc. No changes can be made.
10.2.5.11 Factory default
Point to Factory default and press the joystick to reset the camera to the factory set-
tings.
➲ The camera will be restarted when you restore factory settings. This will take a few
seconds.
10
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006 99
10 – Camera program
To Next Page
Loading...
