5502A
Operators Manual
4-54
4. Push the softkey OUTPUT SETUP to open the output setup submenus.
5. Push the softkey SET LIMITS to open the set limits menu (see below).
nn117f.eps
6. To Limit Voltage (applies to both dc and ac voltages), push a softkey below
VOLTAGE to open the voltage limits menu (see below).
nn118f.eps
a. Push the “Upper Limit” or the “Lower Limit” softkey, as necessary, and record
the new limit.
b. Push then one or more times to return to a previous menu.
7. To Limit Current (applies to both dc and ac currents). Push a softkey below
CURRENT to open the current limits menu (see below).
nn119f.eps
a. Push the “Upper Limit” or the “Lower Limit” softkey, as necessary, and record
the new limit.
b. Push then one or more times to return to a previous menu.
Sample Applications
• Calibrate a Fluke 80 Series Digital Multimeter (DMM)
• Calibrate a Fluke Model 41 Power Harmonics Analyzer for Power and Harmonics
• Calibrate a Fluke Model 51 Digital Thermometer
To Next Page
Loading...
