Fluke 5502A - Detailed Specifications; DC Voltage

5502A
Operators Manual
1-10
outputs (e.g. 1000 V, 20 A) choose a ling voltage
setting that is ±7.5 % from nominal.
Power Consumption ............................................. 600 VA
Dimensions (HxWxL) .............................................. 17.8 cm x 43.2 cm x 47.3 cm (7 in x 17 in x 18.6 in) Standard rack
width and rack increment, plus 1.5 cm (0.6 in) for feet on bottom of
unit.
Weight (without options) ......................................... 22 kg (49 lb)
Absolute Uncertainty Definition .......................... The 5502A specifications include stability, temperature coefficient,
linearity, line and load regulation, and the traceability of the external
standards used for calibration. You do not need to add anything to
determine the total specification of the 5502A for the temperature
range indicated.
Specification Confidence Level ........................... 99 %
Detailed Specifications
DC Voltage
Range
Absolute Uncertainty, tcal ± 5 °C
±(% of output + μV)
Stability
Resolution (µV) Max Burden
[1]
24 hours, ± 1 °C
±(ppm of output + μV)
90 Day 1 Year
0 to 329.9999 mV 0.005 + 3 0.006 + 3 5 + 1 0.1 65 Ω
0 to 3.299999 V 0.004 + 5 0.005 + 5 4 + 3 1 10 mA
0 to 32.99999 V 0.004 + 50 0.005 + 50 4 + 30 10 10 mA
30 to 329.9999 V 0.0045 + 500 0.0055 + 500 4.5 + 300 100 5 mA
100 to 1020.000 V 0.0045 + 1500 0.0055 + 1500 4.5 + 900 1000 5 mA
Auxiliary Output (dual output mode only)
[2]
0 to 329.999 mV 0.03 + 350 0.04 + 350 30 + 100 1 5 mA
0.33 to 3.29999 V 0.03 + 350 0.04 + 350 30 + 100 10 5 mA
3.3 to 7 V 0.03 + 350 0.04 + 350 30 + 100 100 5 mA
TC Simulate and Measure in Linear 10 μV/°C and 1 mV/°C modes
[3]
0 to 329.999 mV 0.005 + 3 0.006 + 3 5 + 1 0.1 10 Ω
[1] Remote sensing is not provided. Output resistance is < 5 mΩ for outputs ≥ 0.33 V. The AUX output has an output resistance of
<1 Ω. TC simulation has an output impedance of 10 Ω ± 1 Ω.
[2] Two channels of dc voltage output are provided.
[3] TC simulating and measuring are not specified for operation in electromagnetic fields above 0.4 V/m.
Range
Noise
Bandwidth 0.1 Hz to 10 Hz p-p
±(ppm of output + floor in μV)
Bandwidth 10 Hz to 10 kHz rms
0 to 329.9999 mV 0 + 1
6 μV
0 to 3. 3.299999 V 0 + 10
60 μV
0 to 32.99999 V 0 + 100
600 μV
30 to 329.9999 V 10 + 1000 20 mV
100 to 1020.000 V 10 + 5000 20 mV
Auxiliary Output (dual output mode only)
[1]
0 to 329.999 mV
0 + 5 μV 20 μV
0.33 to 3.29999 V
0 + 20 μV 300 μV
3.3 to 7 V
0 + 100 μV 1000 μV
[1] Two channels of dc voltage output are provided.