5502A
Operators Manual
2-6
Table 2-2. Mains-Power Cord Types Available from Fluke Calibration
Type Voltage/Current
Fluke Calibration Option
Number
North America 120 V/15 A LC-1
North America 240 V/15 A LC-2
Universal Euro 220 V/15 A LC-3
United Kingdom 240 V/13 A LC-4
Switzerland 220 V/10 A LC-5
Australia 240 V/10 A LC-6
South Africa 240 V/5 A LC-7
LC-1 LC-2 LC-3 LC-4
LC-5 LC-6
LC-7
nn008f.eps
Figure 2-2. Mains-Power Cord Types Available from Fluke Calibration
Placement
You can put the Product on a bench top or install it in a standard-width 24 inch (61 cm)
depth equipment rack. For bench-top use, the Calibrator has a non-slip feet. To install the
Calibrator in an equipment rack, use the 5502A Rack-Mount Kit, Model Y5537.
Instructions to install the Calibrator into a rack come with the kit.
To Next Page
Loading...
