5502A
Operators Manual
1-8
Instruction Manuals
The 5502A Manual Set includes:
• 5502A Operators Manual on included CD-ROM (PN 4155227)
• 5502A Getting Started (PN 4155209)
One of each manual above comes with the instrument. Refer to the Fluke Calibration
Catalog or speak to a Fluke Calibration sales representative (see “Contact Fluke
Calibration” in this chapter) if more printed copies are necessary. The manuals are also
available on the Fluke Calibration website.
5502A Getting Started Manual
The 5502A Getting Started Manual contains a brief introduction to the 5502A Manual
Set, instructions on how to get your calibrator prepared for operation and a complete set
of specifications.
5502A Operators Manual
This 5502A Operators Manual supplies complete information to install the Calibrator and
operate it from the front-panel keys and in remote configurations. The manual also has a
glossary of calibration, specifications, and error-code information. The Operators Manual
includes:
• Installation
• Controls and features, front-panel operation
• Remote operation (IEEE-488 bus or serial port remote control)
• Serial port operation (print, show, or transfer data, and setup for serial port remote
control)
• Operator maintenance, with verification and calibration procedures
• Accessories
• SC600 and SC300 oscilloscope calibration options
Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information and download the latest manual supplements, visit Fluke
Calibration’s website at www.flukecal.com.
To register your product, visit http://flukecal.com/register-product .
To Next Page
Loading...
