5502A
Operators Manual
8-4
Table 8-1. Options and Accessories (cont.)
Model Description
Y5537 24 in. (61 cm) Rack Mount Kit for 5502A
Y8021 Shielded IEEE-488 Cable 0.5 m (1.64 ft)
Y8022 Shielded IEEE-488 Cable 2 m (6.56 ft)
Y8023 Shielded IEEE-488 Cable 4 m (13 ft)
Rack Mount Kit
The Y5537 rack mount kit supplies all the hardware necessary to install the 5502A on
slides in a 24-inch (61 cm) equipment rack. Instructions are supplied in the kit. (To rack
mount the 5725A Amplifier, order kit Y5735.)
IEEE-488 Interface Cable
Shielded IEEE-488 cables are available in three lengths (See Table 8-1). The cables
attach to the 5502A to other IEEE-488 devices. Each cable has double 24-pin connectors
at each end for stacking. Metric threaded installation screws are supplied with connectors.
Appendix D shows the pinout for the IEEE-488 connector.
5500A/LEADS
The optional test lead kit, 5500A/LEADS, is a kit of test leads for voltage and current,
thermocouple extension wires, thermocouple miniconnectors, and thermocouple
measuring “beads.”
To Next Page
Loading...
