Fluke 5520A - Page 419

Index (continued)
5
dc power summary, 1-22
frequency, 1-26
harmonics (2nd - 50th), 1-27
phase, 1-24
power and dual output limit, 1-23
power uncertainty, 1-25
SC300 oscilloscope calibration option, 8-60
SC600 Oscilloscope Calibration Option, 8-5
temperature calibration (RTD), 1-21
temperature calibration (thermocouple), 1-20
SPLSTR remote command, 6-44
SPLSTR? remote command, 6-44
square wave and duty cycle, 4-48
SRE (service request enable register), 5-39
SRE register, 5-39
SRQ, 5-37
SRQ error handler example, 5-3
SRQ, service request line, 5-39
SRQSTR remote command, 6-45
SRQSTR? remote command, 6-45
standard equipment table, 2-3
status
checking 5520A, 5-37
commands, 6-9
register overview - figure, 5-38
register summary - table, 5-37
STB, 5-37
STB, 5-37
STBY remote command, 6-46
synchronizing using 10 MHz IN/OUT, 4-58
SYNCOUT remote command, 6-46
tab or space characters, 5-34
TC (thermocouple) minijack, 3-9
TC_MEAS remote command, 6-46
TC_OFFSET remote command, 6-46
TC_OFFSET? remote command, 6-46
TC_OTCD remote command, 6-47
TC_OTCD? remote command, 6-47
TC_REF remote command, 6-47
TC_REF? remote command, 6-47
TC_TYPE remote command, 6-48
TC_TYPE? remote command, 6-49
TC_TYPE_D remote command, 6-49
TC_TYPE_D? remote command, 6-50
TDPULSE remote command, SC600
option, 8-38
TEMP_STD remote command, 6-50
temperature
(thermocouples), measuring, 4-45
calibration (RTD) specifications, 1-21
calibration (thermocouple)
specifications, 1-20
simulation (RTD), setting the output, 4-42
simulation (thermocouple), setting the
output,4-40
terminators, 5-35
test lead kit, 5500A/Leads accessory, 9-4
thermocouple connections, 4-17
thermocouple measurement, remote
example, 5-48
thermocouples, measuring, 4-45
three-phase power calibration, 4-60
time marker calibration, SC300 option, 8-80
time marker calibration, SC600 option, 8-26
TLIMIT remote command, SC600 option, 8-39
TLIMIT? remote command, SC600 option, 8-39
TLIMIT_D remote command, SC600
option, 8-40
TLIMIT_D? remote command, SC600
option, 8-40
TMWAVE remote command, SC600
option, 8-38
TMWAVE? remote command, SC600
option, 8-38
triangle wave, 4-47
TRIG remote command, for SC300, 8-85
TRIG remote command, SC600 option, 8-36
TRIG? remote command, for SC300, 8-85
TRIG? remote command, SC600 option, 8-37
trigger testing, SC300 option, 8-82
truncated sine wave, 4-48
TSENS_TYPE remote command, 6-51
TSENS_TYPE? remote command, 6-51
two 5520As sourcing current in parallel, 4-59
UNCERT? remote command, 6-52
unit keys, 3-7
UUT connections, 4-12
UUT_FLUSH remote command, 6-52
UUT_RECV? remote command, 6-52
UUT_RECVB? remote command, 6-53
UUT_SEND remote command, 6-53
UUT_SENDB remote command, 6-54
UUT_SET remote command, 6-54
UUT_SET? remote command, 6-55
V/DIV menu, SC300 option, 8-70
VAL? remote command, 6-55
VIDEOFMT remote command, SC600
option, 8-38
VIDEOFMT? remote command, SC600
option, 8-39
VIDEOMARK remote command, SC600
option, 8-39
VIDEOMARK? remote command, SC600
option, 8-39
Visual Basic, using to test the Host RS-232
interface, 5-15
Visual Basic, using to test the UUT RS-232
interface, 5-19
VVAL? remote command, 6-55
WAVE remote command, 6-56
WAVE? remote command, 6-56
ZCOMP remote command, 6-57