5. USE
STATIC SHIELDING CONTAINERS FOR
HANDLING AND TRANSPORT
WHEN REMOVING
PLUG-IN ASSEMBLIES,
HANDLE
ONLY BY NON-CONDUCTIVE
EDGES AND NEVER TOUCH
OPEN EDGE
CONNECTOR
EXCEPT AT STATIC-FREE
WORK STATION. PLACING
SHORTING
STRIPS
ON EDGE
CONNECTOR HELPS TO
PROTECT INSTALLED SS DEVICES.
6. DO
NOT
SLIDE
S.S.
DEVICES OVER
ANY SURFACE
7. AVOID PLASTIC, VINYL AND STYROFOAM'
IN WORK AREA
9. HANDLE S.S. DEVICES
ONLY
AT A
STATIC-FREE WORK
STATION
10. ONLY
ANTI-STATIC TYPE SOLDER-
SUCKERS SHOULD BE USED.
11. ONLY GROUNDED TIP SOLDERING
IRONS SHOULD
BE
USED.
A complete line of static
shielding
bags and acces-
sories is
available from Fluke Parts Department,
Telephone
800-526-4731
or write to;
JOHN FLUKE MFG. CO„ INC.
PARTS DEPT
M/S
86
9028 EVERGREEN WAY
EVERETT, WA
98204
PORTIONS REPRINTED
WITH PERMISSION
FROM TEKTRONIX, INC.
AND GENERAL
DYNAMICS, POMONA DIV.
*
Dow Chemical
Page
2 of 2
J0089D-07U8604/SE EN Litho in U.S.A.
Rev. 1 MAR 86
To Next Page
Loading...
