Some semiconductors and custom IC's can be
damaged by electrostatic discharge during
handling. This notice explains how you can
minimize the chances of destroying such devices
by:
1.
Knowing that there is
a
problem.
2.
Leaning the guidelines for handling them.
3.
Using the procedures, packaging, and
bench techniques that are recommended.
The following practices should be followed to minimize damage to S.S. (static sensitive) devices.
3.
DISCHARGE PERSONAL STATIC BEFORE
HANDLING DEVICES. USE A HIGH RESIS-
TANCE GROUNDING WRIST STRAP.
1.
MINIMIZE HANDLING
2.
KEEP PARTS IN ORIGINAL CONTAINERS
UNTIL READY
FOR
USE.
\
4.
HANDLE S.S. DEVICES
BY
THE BODY.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
