Safety Instructions
Introduction 1
1-3
Introduction
Read these pages carefully before beginning to install and use the Test Tool.
This section contains information, cautions, and warnings that must be followed
to ensure safe operation and to keep the Test Tool in a safe condition.
ļļ Warning
To prevent possible electrical shock, fire, or personal injury, do
not service the Test Tool unless you are qualified to do so.
Service described in this manual is to be done only by qualified
service personnel.
Safety Precautions
For the correct and safe use of this Test Tool it is essential that both operating
and service personnel follow generally accepted safety procedures in addition to
the safety precautions specified in this manual. Specific warning and caution
statements, where they apply, will be found throughout the manual. Where
necessary, the warning and caution statements and/or symbols are marked on
the Test Tool.
Caution and Warning Statements
A Warning identifies hazardous conditions and procedures that are dangerous to
the user. A Caution identifies conditions and procedures that can cause damage
to the Product or the equipment under test.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
