FOR-A MFR-5000 - Channel Name Import Commands (10)

130
7-3-6. Channel Name Import Commands (10)
K: commands allow you to import Source and Destination names from the device that sends
K: commands to the MFR system.
.
 Command Format
Command
Command response
K:<S or D><S or L or A><No.>,<Dat>
Echo
Prompt
Commands
BYTE No.
1
2
3
4
5-7
8
9
Command
K
:
S
S
000-3FF
,
CR
D
L
000-1FF
A
BYTE 3
<S or D> Select between S (Source) or D (Destination)
BYTE 4
<S or L or A > Select the destination to which names are imported.
S: Source Name or Destination Name, ID Name (Kanji) fields on the Web
GUI.
L: Source Name or Destination Name, Import Name fields on the Web GUI.
A: Source Name or Destination Name, Name (ASCII) fields on the Web GUI.
BYTE5-7
<No.> Indicates the channel number.
Source: 000-3FF, Destination: 000-1FF
BYTE9-
<Dat> Channel names
Strings in Hex characters (max. 128 bytes). Character code: UTF-8
CR
Carriage return