FOR-A MFR-5000 User Manual

85
To Change IP Address:
(1) Hold down the button where the number to be changed is displayed. The button will
blink.
(2) Turn the control knob to change the number.
(3) Repeat (1) and (2) to change the IP address.
(4) Hold down the current DEST button to confirm the change. The remote control unit will
automatically restart.
NETWORK > PC-LAN NETWORK
Menu item
Description
IP
Displays the PC-LAN IP address.
MASK
Displays the PC-LAN subnet mask.
GW
Displays the PC-LAN Default Gateway IP address.
NETWORK > PC-LAN REBOOT
To restart the PC-LAN port:
(1) Press REBOOT.
(2) Hold down EXEC HOLD 1s to restart the PC-LAN port while showing "STARTUP" or
"NOW".
5-4-4-2. VER/ALARM
 Menu List
Menu item
Description
VERSION
Displays the firmware version.
PS1
Displays the AC adapter 1 status.
PS2
Displays the AC adapter 2 status.
TEMPERATURE
Displays the temperature.
VOLTAGE
Displays the voltage status.
5-4-4-3. DEFAULT
 Menu List
Menu item
Description
Set by
MODE
Allows you to select a mode when the remote control unit is
powered on.
DEST: Destination mode
SRC: Source mode
LEVEL: Level mode
PAGE ALL: Page mode (all groups)
PAGE GROUP A: Page mode (Group A)
PAGE GROUP B: Page mode (Group B)
PAGE GROUP C: Page mode (Group C)
PAGE GROUP D: Page mode (Group D)
SETTING: Setting mode
Pressing a
button
DEST
Allows you to select a destination channel when the remote
control unit is powered on.
CONTROL
LEVEL
Allows you to select a level when the remote control unit is
powered on.
Pressing a
button

FOR-A MFR-5000 Specifications

General

Brand	FOR-A
Model	MFR-5000
Category	Switch
Language	English