FOR-A MFR-5000 - Brightness; Ru-Ru Connect; Tenkey; Salvo Clear

88
5-4-4-7. BRIGHTNESS
Menu List
Menu item
Description
Set by
BUTTON
Allows you to select a button.
Pressing a
button
LOW LIGHT
Allows you to select between NORMAL and LOWLIGHT for
dim lighting.
Pressing a
button
5-4-4-8. RU-RU CONNECT
Menu List
Menu item
Description
Set by
CONNECT
Allows you to enable /disable the link of remote control
units.
Pressing a
button
MASTER ID
Allows you to select a link ID.
CONTROL
5-4-4-9. TENKEY
Menu List
Menu item
Description
Set by
INPUT MODE
Allows you to select the confirmation method when using
the numeric keypad.
DIRECT: Confirms setting by just pressing a numeric key.
ENTER: Confirms setting by pressing a numeric key then
pressing ENTER.
Pressing a
button
START
This menu allows you to select the start point of each
setting between 0 and 1 in numeric keypad mode.
Pressing a
button
5-4-4-10. PAGE
Menu List
Menu item
Description
Set by
MODE
Allows you to select the control knob behavior in Page
mode.
UP/DOWN: Turns the control knob to move one page
forward/back.
JUMP: Turns the control knob to select a page then
presses the control knob to move to the page.
Pressing a
button
ASSIGN
Allows you to select ONE PAGE or ALL PAGE for PAGE
button assignments.
Pressing a
button
DISPLAY
Allows you to select whether to display unit names for
Current PAGE display (C/D).
PAGE C&D: Current PAGE display for Group C and D.
UNIT NAME: Displays unit names.
Pressing a
button
5-4-4-11. SALVO CLEAR
This menu displays the button-assigned salvo list and allows you to clear salvos.
To Clear a Button-assigned Salvo:
(1) Press a salvo button. The button will blink and "CLEAR" is displayed on the button.
(2) Press the current DEST button.