80
5-4-3-6. DST INHIBIT
Set INHIBIT to enabled or disabled for a destination channel.
Turn the control knob to select a destination channel, then press the knob to confirm the
selection.
Turn the control knob to select ON or OFF, then press the knob to confirm the selection.
ON disables the output selection of the selected destination channel.
OFF cancels the Inhibit setting.
The indication of buttons assigned to the inhibited destination will be crossed.
5-4-3-7. SRCINHIBIT
Set INHIBIT to enabled or disabled for a source channel.
Turn the control knob to select a source channel, then press the knob to confirm the
selection.
Turn the control knob to select ON or OFF, then press the knob to confirm the selection.
ON disables the output selection of the selected source channel.
OFF cancels the Inhibit setting.
The indication of buttons assigned to the inhibited source channel will be crossed.
SETTING> DSTINHIBIT
DST 1 : ON <ENT>
SETTING>SRCINHIBIT
SRC 1 : OFF <ENT>
SETTING>SRCINHIBIT
SRC 1 : ON <ENT>
SETTING>DSTINHIBIT
DST 1 : OFF <ENT>
To Next Page
Loading...
