EasyManua.ls Logo

FOR-A MFR-5000 - Page 139

FOR-A MFR-5000
157 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
139
MFR-16AAI
Analog Audio Input Card with A/D converter (Max. 4 cards)
- 25-pin D-sub (female) x 4 (16 stereo pairs, 32 channels)
- Balanced or unbalanced, 600 ohm or highimpedance
- Sampling frequency: 48kHz
MFR-16AAIEX
Analog Audio Input Card with A/D converter (Max. 4 cards)
- 25-pin D-sub (female) x 4 (16 stereo pairs, 32 channels)
- Balanced or unbalanced, 600 ohm or high impedance
- Sampling frequency: 48kHz
MFR-16AESI
AES/EBU Audio Input Card (Max. 8 cards)
- BNC x 16 (16 stereo pairs, 32 channels)
- 75 ohm, BNC
Audio Output
MFR-16AAOEX
Analog Audio Output Card with D/A converter (Max. 4 cards)
- 25-pin D-sub (female) x 4 (16 stereo pairs, 32 channels)
- Balanced or unbalanced, less than 100Ω, 48kHz
- Sampling frequency: 48kHz
MFR-16ADAO
Embedded/AES/Analog Audio Output Card (Max. 8 cards)
AES/EBU (Synchronous only)
- BNC x 8 (8 stereo pairs. 16 channels)
- 48 kHz
Embedded audio (1080/59.94i or 1080/60i)
- BNC x 2 (8 stereo pairs. 16 channels),
- Unbalanced, 48 kHz
Analog audio
- 25-pin D-sub (female) x 1 (4 stereo pairs. 8 channels),
- Balanced or unbalanced, less than 100Ω, 48 kHz
MFR-16AESO
AES/EBU Audio Output Card (Max. 8 cards)
- BNC x 16 (16 stereo pairs. 32 channels)
- 75 ohm BNC
RS-422 data input/output
MFR-16DTIO
RS-422 data Input / Output Card (Max. 8 cards)
Data rate: Max. 115.2 kbps
9-pin D-sub (female) x 16
Reference Input
BB: 0.429 Vp-p (NTSC)/0.45 Vp-p (PAL) or Tri-level Sync: ±0.3 Vp-p
75Ω BNC x 2, loop-through (Terminate with 75Ω terminator, it unused.)
Interfaces
MFR-LAN
10/100/1000 Base-T, RJ-45 x 2
(For connecting up to 128 RU/GPI units.)
(Second LAN port used in redundant CPU configuration)
PC-LAN
10/100 Base-TX, RJ-45 x 2 (for PC operation)
(Second LAN port used in redundant CPU configuration)
SERIAL
RS-232C/RS-422 (Internal switch), 9-pin D-sub (male) x 1
ALARM
9-pin D-sub (female) x 1 (Input: Reset, Output: Power, Fan Alarm)
Temperature
0ºC to 40ºC
Humidity
30% to 85% (no condensation)
Power
100 VAC to 240 VAC ±10%, 50/60Hz IN x 2
Consumption
128 x 128 input/output, Dual CPU/Redundant Power Unit (Maximum
Configuration):
100 V AC to 120 V AC: 1000 VA (982 W)
200 V AC to 240 V AC: 946 VA (938 W)
Dimensions
480 (W) x 354 (H) x 402 (D) mm, EIA 8 RU
Weight
50 kg (with full options)
Consumables
Power supply unit: Replace every 5 years
Fans: P-1426, P-1429, P-1430, P-1431 Replace every 4 years

Table of Contents