FOR-A MFR-5000 User Manual

7
LAN Cable (straight)
(*2)
1
MFR-39/40/18RU/16RUTA/18RUA/39RUA:
UTP cable, 5m
MFR-16RU/16RUD: STP cable, 5m
(MFR-16/32/64RUW is supplied w/o LAN Cable.)
(*1) Depending on the production date, AC adapter is supplied without DC lock plug, but with a DC cable
retaining clip.
(*2) User-prepared LAN cables are also available and Shielded Twist Pair cables are recommended for
MFR-16RU/16RUD/16RUW/32RUW/64RUW.
 Option (for MFR-5000)
ITEM
QTY
REMARKS
MFR-CPU
1
Redundant CPU card *
MFR-PS
1 set
Redundant power supply unit (with AC cord and AC
cord retaining clip.)
 Interface Expansion Unit
ITEM
QTY
REMARKS
MFR-GPI
1
AC Adaptor *
1
With DC lock plug
AC cable
1
Rack Mount Brackets
1 set
EIA standard type
LAN Cable (straight)
1
* Depending on the production date, AC adapter is supplied without DC lock plug, but with a DC cable
retaining clip.
 Tally Manager Unit
ITEM
QTY
REMARKS
MFR-TALM
1
AC Adaptor *
1
With DC lock plug
AC cable
1
Rack Mount Brackets
(optional)
1 set
Single- or Dual-unit type
EIA standard type
* Depending on the production date, AC adapter is supplied without DC lock plug, but with a DC cable
retaining clip.
Installing the AC Cord Retaining Clip (Main Unit)
Secure the AC cord with the supplied AC cord retaining clip to prevent accidental removal from
the unit.
Procedure
1) Securely plug the AC cord into the AC connector.
2) Attach the Retaining clip on to the side of the AC cord.
3) Thread both ends of the retaining clip into the holes of the retaining clip base attached on the
unit.

FOR-A MFR-5000 Specifications

General

Brand	FOR-A
Model	MFR-5000
Category	Switch
Language	English