FOR-A MFR Series User Manual

73
Salvo
Store/Recall: Allows you to select a mode
from Store or Recall.
MU/30FP: Allows you to select the unit to
recall an MU Salvo or RU Salvo.
No.: Allows you to select the salvo number
to recall.
For details on MU Salvo recall, see “Salvo”
in MFR-RU Series Operation Manual.
(Recall, MU)
SALVO button
(MU Salvo recall)
---
(Recall, RU)
SALVO button
(RU Salvo recall)
---
Link
(No parameter)
LINK button

Preview
Dest: Destination number
Operation Preview
button

 LOCK Button on MFR-30FP
The MFR-30FP initially has a LOCK button (65 on the Front Panel Image), to which lock type
can be set as shown below. LOCK type of this LOCK button can be changed.
1. Select Button 65.
2. Select a lock mode from Parameter list. (See Lock in the Function List on the previous
page for details.)
5-7-2. 30FP Info
The 30FP Info page allows you to set network settings and check power monitoring result.
Parameter
Description
Model Name
Displays the model information.
Unit Name
Displays the unit name and unit
ID.
Communication
Displays the LAN status
(OK: Normal / NG: Error)
IP Address
Displays the IP address.
Subnet Mask
Displays the subnet mask.
MAC Address
Displays the MAC address.
Firmware Version
Displays the firmware version
information.
FPGA Version
Displays the FPGA version
information.

FOR-A MFR Series Specifications

General

Brand	FOR-A
Model	MFR Series
Category	Switch
Language	English