126
Deactivate the
acoustic alarm
signal
The acoustic alarm signal can be deactivated. An error is then only indicated by the
ashing ALARM indicator and by the alarm number on the digital display PV.
Deactivate ALARM signal:
2. Press the MENU button again for 2 seconds.
► Setting level SE.01 (Key-lock) is shown.
3. Press the MENU button a third time for 2 Seconds.
drücken.
► Setting level for the acoustic alarm signal is shown.
1. Press the MENU button for 2 seconds.
► Monitoring menu is shown on display.
4. Use the ARROW keys to make the required setting:
Display shows [oFF]: Alarm signal is switched o
Display shows [on] : Alarm signal is switched on
5. Press the MENU button again.
► The choosen settings will be saved.
To Next Page
Loading...
