128
Maintenance
Safety
Daily check
Check ambient conditions: - no tools / no heavy objects are placed on the
device
- no excessive tensile load of the cables
Check connections: - no exiting coolant at the connection points
Check uid level: - cooling liquid must be lled up to the H mark.
Check operating panel: - all displays are clearly legible, no dirt or dust
on it
Check the operating conditions: - no abnormal noise, vibration, smell or smoke
WARNING!
Risk of injury and damage during maintenance work.
Before commencing maintenance work:
- turn the main switch in the „0“ (OFF) position.
- unplug the system from the mains!
WARNING!
Risk of injury and damage from incorrectly performed maintenance.
It is essential to adhere to the maintenance operations and intervals.
The manufacturer accepts no liability for any damage caused by inadequate or poorly
performed maintenance.
- All maintenance work on the system may only be carried out by trained technicians.
To Next Page
Loading...
