97
Installation
Prepare water
connections
Tools required:
Allen key 12mm
Allen key 5mm
Flat wrench 27mm
1. Screw the connection piece into the
water outlet connection.
2. Tighten with the allen key (12 mm).
3. Carry out the same procedure for the water inlet connection (Steps 1 to 3).
Properties of the
installation site
Foundations:
- even and rm
Environment:
- install the water chiller horizontal!
- External cables must not have excessive tensile load on the water chiller!
- Do not place heavy objects (tools, etc.) on the water chiller!
To Next Page
Loading...
