Fronius Symo Advanced 10.0-3-M

To Previous Page

Main Page

Table of Contents3
Status Codes - Class5
Safety Rules7
Safety Rules9
Explanation of Safety Notices9
General9
Environmental Conditions10
Qualified Personnel10
Noise Emission Values10
EMC Measures10
Data Protection11
Copyright11
System Component Compatibility11
General Information13
General15
Device Concept15
Proper Use/Intended Purpose15
Warning Notices on the Device16
AFCI - Arc Fault Circuit Interrupter (Arc Guard)17
Data Communication and Fronius Solar Net19
Fronius Solar Net and Data Interface19
Data Communication Area19
Description of the "Fronius Solar Net" LED20
Example21
Explanation of the Multifunction Current Interface22
Dynamic Power Reduction by Means of Inverter23
Fronius Datamanager 2.024
Fronius Datamanager 2.0 During the Night or When the Available DC Voltage Is Insufficient27
Starting for the First Time27
Further Information on Fronius Datamanager29
Controls and Indicators30
Controls and Displays30
Display31
Switching off Current Supply and Restarting the Inverter32
Switching off the Power Supply to the Inverter32
Installation33
Installation Location and Position35
Explanation of Safety Notices35
Safety35
Proper Use/Intended Purpose36
Choice of Location37
Installation Position38
General Comments Regarding Choice of Location39
Attaching the Mounting Bracket41
Safety41
Selecting Wall Plugs and Screws41
Recommended Screws41
Opening the Inverter41
Fitting the Mounting Bracket to a Wall43
Installing the Mounting Bracket on a Mast or Beam43
Fitting the Mounting Bracket to Metal Supports44
Do Not Warp or Deform the Mounting Bracket44
Connecting the Inverter to the Public Grid (AC Side)45
Safety45
Monitoring the Grid45
Type of AC Cable45
Preparing the Aluminium Cables for Connection45
AC Terminals46
Cross Section of the AC Cable46
Connecting the Inverter to the Public Grid (AC)47
Maximum Fuse Rating on Alternating Current Side48
Connection Variants on Multi-MPP Tracker Inverters50
General50
Multi MPP Tracker50
Connecting Solar Module Strings to the Inverter53
Safety53
General Comments Regarding PV Modules54
DC Terminals54
Connecting Aluminium Cables54
Solar Module Strings - Checking the Polarity and Voltage55
Connecting the Solar Module Strings to the Inverter56
Data Communication58
Permitted Cables for the Data Communication Area58
Routing Data Communication Cables58
Installing the Datamanager in the Inverter59
Attaching the Inverter to the Mounting Bracket61
Starting for the First Time64
Starting the Inverter for the First Time64
Notes Regarding Maintenance67
Maintenance67
Cleaning67
Australian Conduits68
Tightly Sealing the Conduits68
Seal Conduits68
Serial Number Sticker for Customer Use69
Settings71
Navigation at the Menu Level73
Activating Display Backlighting73
Automatic Deactivation of Display Backlighting / Changing to the "NOW" Menu Item73
Opening the Menu Level73
Values Displayed under the NOW Menu Item74
Values Displayed under the LOG Menu Item74
SETUP Menu Item76
Initial Setting76
Software Updates76
Navigating the SETUP Menu Item76
Application Example: Setting the Time77
Menu Items in the Set-Up Menu79
Standby79
Datcom79
Usb80
Relay (Floating Contact Switch)81
Energy Manager(under Relay Menu Item)82
Time / Date83
Energy Yield85
Fan86
The INFO Menu Item87
Measured Values87
PSS Status87
Grid Status87
Device Information87
Version89
Switching the Key Lock on and off90
USB Stick as a Data Logger and for Updating Inverter Software91
USB Flash Drive as a Datalogger91
Data Volume and Storage Capacity92
Buffer Memory93
Suitable USB Flash Drives93
USB Flash Drive for Updating the Inverter Software94
Removing the USB Flash Drive94
The Basic Menu96
Access the Basic Menu96
Menu Items in the Basic Menu96
Settings if the "DC SPD" Option Is Installed97
Appendix99
Status Diagnostics and Troubleshooting101
Status Code Display101
Total Failure of the Display101
Class 1 Status Codes101
Class 2 Status Codes102
Class 3 Status Codes102
Status Codes - Class106
Class 6 Status Codes108
Class 10 - 12 Status Codes111
Customer Service111
Operation in Dusty Environments111
Technical Data112
Fronius Symo Advanced 10.0-3-M112
Fronius Symo Advanced 12.5-3-M114
Fronius Symo Advanced 15.0-3-M116
Fronius Symo Advanced 17.5-3-M118
Fronius Symo Advanced 20.0-3-M120
Explanation of Footnotes122
Wlan122
Integrated DC Disconnector Fronius Symo Advanced122
Integrated DC Disconnector Fronius Symo Advanced 15.0123
Warranty Terms and Conditions, and Disposal125
Fronius Manufacturer's Warranty125
Disposal125

Fronius Symo Advanced 10.0-3-M - Page 128

Table of Contents

Other manuals for Fronius Symo Advanced 10.0-3-M

Related product manuals