Navigation at the menu level
Activating dis-
play backlighting
1
Press any key
The display backlighting is activated.
There is an option under "Display Settings - Backlighting" in the SETUP menu
to set the display backlighting so that it is on all the time or off all the time.
Automatic deac-
tivation of dis-
play backlight-
ing / changing to
the "NOW" menu
item
If two minutes pass without any button being pressed, the display backlighting
switches off automatically and the inverter goes to the "NOW" menu item (as-
suming the display backlighting is set to AUTO).
The automatic selection of the "NOW" menu item can happen from any position
on the menu level, unless the inverter was manually switched into the "Standby"
operating mode.
After automatically selecting the "NOW" menu item, the current power of feed-
ing in is displayed.
Opening the
menu level
1
Press "ESC"
The display switches to the menu level.
2
Using the "Left" or "Right" keys se-
lect the desired menu item
3
Press the "Enter" key to select the
desired menu item
The menu items
-
NOW
Displays real-time values
-
LOG
Data recorded today, during the current calendar year and since the inverter
was started for the first time
-
GRAPH
Day characteristic displays a plot showing the output power during the day.
The time axis is scaled automatically. Press the "Back" key to close the dis-
play
-
SETUP
Setup menu
-
INFO
Information about the device and the software
73
EN
To Next Page
Loading...
