7
IMPORTANT! Observe the torque val-
ues marked on the side underneath
the terminals.
8 9
If DC cables are laid over the shaft of
the DC main switch or across the con-
nection block of the DC main switch,
they may be damaged when the invert-
er is swung in or they may even prevent
the inverter from being swung in.
IMPORTANT!
Do not lay DC cables over the shaft of
the DC main switch
or across the AC connection block or
the DC main switch connection block.
DC cable must not protrude beyond
the edge of the housing!
57
EN
To Next Page
Loading...
