Fronius Symo Advanced 10.0-3-M - Page 84

Set date
Set the date (dd.mm.yyyy or mm/dd/yyyy - depending on the setting for the
date display format)
Time display format
For specifying the time display format
Setting range 12hrs / 24hrs
Factory setting Depends on country setup
Date display format
for specifying the date display format
Setting range mm/dd/yyyy or dd.mm.yy
Factory setting Depends on country setup
Summer/winter time
Activate/deactivate automatic changeover between summer and winter time
IMPORTANT! Only use the automatic summer/winter time changeover func-
tion if the Fronius Solar Net ring does not include any LAN- or WLAN-compat-
ible system components (e.g. Fronius Datalogger Web, Fronius Datamanager or
Fronius Hybridmanager).
Setting range on / off
Factory setting on
IMPORTANT! The time and date must be set accurately in order for the day
and year values and for the day characteristic to be displayed correctly.
Display settings
Setting range Language / Night mode / Contrast / Illumination
Language
Set language for display
Setting range English, German, French, Spanish, Italian, Dutch,
Czech, Slovakian, Hungarian, Polish, Turkish, Por-
tuguese, Romanian
Night mode
Night mode controls Fronius DATCOM and inverter display operation during
the night or when the DC voltage is insufficient
Setting range AUTO / ON / OFF
Factory setting OFF
AUTO: Fronius DATCOM mode is always in effect as long as there is a
Fronius Datamanager connected in an active and uninterrupted
Fronius Solar Net.
The inverter display remains dark during the night, but can be ac-
tivated by pressing any function button.
84