Fronius Symo GEN24 3.0 User Manual

Switching off current supply and restarting the
inverter
De-energising
the inverter and
switching it on
again
1
1.
Turn off the automatic circuit
breaker.
2.
Turn the DC disconnector to the
"Off" switch position.
To start up the inverter again, follow
the steps listed above in reverse order.
80

Fronius Symo GEN24 3.0 Specifications

General

Category	Inverter
Output Power	3.0 kW
Protection Rating	IP66
Max. apparent AC power	3.0 kVA
THD	< 3 %
Number of MPP trackers	2
Max. DC power	4.5 kW
Model	Symo GEN24 3.0
Communication Interfaces	Ethernet, Wi-Fi
AC grid connection	Single-phase
Battery voltage range	40 V - 56 V
Max. charging / discharging power	3 kW
Operating Temperature Range	-25°C - +60°C