Fronius Symo GEN24 3.0

Communication
Network Server addresses for data transfer
If a firewall is used for outgoing connections, the following protocols, server ad-
dresses and ports must be allowed for successful data transfer:
-
Tcp fronius-se-iot.azure-devices.net:8883
-
Tcp fronius-se-iot-telemetry.azure-devices.net:8883
-
Tcp fronius-se-iot-telemetry.azure-devices.net:443
-
Udp sera-gen24.fronius.com:1194 (213.33.117.120:1194)
-
Tcp froniusseiot.blob.core.windows.net:443
-
Tcp provisioning.solarweb.com:443
-
Tcp cure-se.fronius.com:443
When using FRITZ!Box products, the Internet access must be configured to be
unlimited and unrestricted.
LAN:
1
Enter host name.
2
Select connection type "automatic" or "static".
3
For connection type "static" - enter IP address, subnet mask, DNS and gate-
way.
4
Click on the "Connect" button.
The connection is established.
WLAN:
Establishing a connection via WPS:
1
Click the "Enable" button.
2
Activate WPS on the WLAN router (see documentation provided with the
WLAN router).
The connection is established automatically.
Select and connect WLAN network:
The networks found are shown in the list. Clicking on the refresh button will
carry out a second search of the available WLAN networks. The "Find network"
input field can be used to further restrict the selection list.
1
Select network from the list.
2
Select connection type "automatic" or "static".
3
For connection type "automatic" - enter WLAN password and host name.
4
For connection type "static" - enter IP address, subnet mask, DNS and gate-
way.
5
Click on the "Connect" button.
99
EN