System
General General settings
1
In the "System name" input field, enter the name of the system (max. 30
characters).
2
"Synchronize time automatically" enabled → select "Area time zone" and
"Location time zone". The date and time are applied from the time zone
entered.
2
"Synchronize time automatically" disabled → enter or select "Date", "Time",
"Area time zone" and "Location time zone".
3
Click on the "Save" button.
Update All available updates are made available on the product page and in the "Down-
load search" area under www.fronius.com .
Firmware update
1
Drag the firmware file into the "Drag&Drop file here" field or select it using
"Select file".
The update will start.
Setup wizard The guided setup wizard can be accessed here.
Restoring the
factory settings
All settings
All configuration data is reset with the exception of the country setup. Changes
to the country setup may only be carried out by authorized personnel.
All settings with no network
All configuration data is reset with the exception of the country setup and the
network settings. Changes to the country setup may only be carried out by au-
thorized personnel.
Event log Current events
All current events of the connected system components are shown here.
IMPORTANT!
Depending on the type of event, these must be confirmed via the "tick" button in
order to be processed further.
Archived
All events of the connected system components that no longer exist are shown
here.
Information This menu displays all system information and the current settings.
96
To Next Page
Loading...
