Fronius TransSynergic 5000 - Pre-Installation and Commissioning Checks

73
EN
NF 3400 - Line filter/line filter 40 A/80 A
General remarks
The NF 3400 PC board (item number 4,070,664) is used with the TPS 3200, TS/TPS
4000/5000 power sources and is for filtering out parasitic frequencies:
- generated by the power source and which can affect other consumer loads
- that come from the mains supply and which can affect the power source
PC board NF 3400 (serial number 14280747 upwards) has been replaced by line filter
40 A (item number 43,0001,1199).
The line filter 40 A is used with TS 4000/5000, TPS 3200/3200 MV/4000/5000.
The line filter 80 A (serial number 15191632 upwards) is used with TS 4000/5000 MV,
TPS 4000/5000 MV.
Important! On the NF 3400 PC board, the mains voltage is on!
Component
position in the
machine
Fig.44 TPS 3200, TS/TPS 4000/5000 position of
NF 3400 PC board
Fig.46 NF 3400 PC board
Overview
Fig.45 TPS 3200, TS/TPS 4000/5000 position of
line filter 40 A/80 A
X1
X2
X3
X4
X5
X6