91
EN
„Changing components“ contains the following subsections:
- Changing throttle (TS 4000/5000, TPS 3200/4000/5000)
- Changing throttle (TPS 2700)
- Changing earth current watchdog
- Changing PC board ASU 27 (TPS 2700 MV)
- Changing shunt (TPS 2700)
- Changing temperature sensor TP 592S
- Changing transformer (TS 4000/5000, TPS 3200/4000/5000)
- Changing transformer (TPS 2700)
- Changing intermediate circuit capacitors (TS 4000/5000, TPS 3200/4000/5000)
Changing components
General remarks
Overview
In the „Changing components“ section there is a description of how to change compon-
ents which
- have no instructions of their own regarding changing and
- require a complete description of how to change them
WARNING! An electric shock can be fatal. Before opening up the machine
- Move the mains switch to the “O” position
- Unplug machine from the mains
- Put up an easy-to-understand warning sign to stop anybody inadvertently
switching it back on again
- Using a suitable measuring instrument, check to make sure that electrical-
ly charged components (e.g. capacitors) have been discharged
To Next Page
Loading...
