X20/X20S and Ethos v1.0.11 User Manual
Channels Count
Channel count defines how many Output channels are allocated. In this example two
ailerons were configured in the model creation wizard.
Output1, Output2
The model creation wizard assigned channels 1 and 2 to the ailerons, because the default
channel order in the System – Sticks menu was set to AETR, i.e. ailerons, elevator,
throttle, rudder.
The default can be altered if required, but care must be exercised to assess any other
impacts to making a change here.
To Next Page
Loading...
