X20/X20S and Ethos v1.0.11 User Manual
Weight Up
The mixer output in the positive direction will be scaled by the weight value entered
here. Negative values are allowed.
Weight Down
Similarly, the mixer output in the negative direction will be scaled by the weight value
entered here.
Slow Up/Down
Response of the output can be slowed down with regard to the input change. Slow
could for example be used to slow retracts that are actuated by a normal proportional
servo. The value is time in seconds that the output will take to cover the -100 to
+100% range.
Channels Count
Channel count defines how many Output channels are allocated.
Reverse
The output of this mixer line can be reversed or inverted by enabling this option.
Please note that servo reversal should be done under Outputs. This option is for
getting the logic of the mixing right.
Output
Any channel can be selected to receive the output from this mixer line. If the Channels
Count above is greater than one, then a channel must be configured for each Output.
Other Pre-defined Mixes
<< this section to be added >>
To Next Page
Loading...
