X20/X20S and Ethos v1.0.11 User Manual
k) a ‘special’ value, i.e. minimum, maximum or 0
The mixer line will take the value of the source at any instant as its input.
Function Type
The Function Type defines how the current mixer line interacts with the others on the
same channel. There are three function types:
Addition
The output of this mixer line will be added to any other mixer lines on the same
output channel.
Multiply
The output of this mixer line will be multiplied with the result of any other mixer
lines on the same output channel.
Replace
The output of this mixer line will replace the result of any other mixer lines on the
same output channel.
Lock
A channel which is "locked" will never be changed by any other mix while the
locked mixer line is active. (This is a good alternative to the Override function of
OpenTX.)
The combination of these operations allows the creation of complex mathematical
operations.
Curve
A standard curve option is Expo, which by default has a value of 0, which means the
response is linear (i.e. no curve). A positive value will soften the response around 0,
while a negative value will sharpen the response.
Any previously defined curve may also be selected. The mixer output will then
modified by this curve. Alternatively, a new curve may be added.
Offset
Offset will shift the mixer output up or down by the offset value entered here.
Negative values are allowed.
To Next Page
Loading...
