X20/X20S and Ethos v1.0.11 User Manual
Trip Sensor
The Trip sensor allows the accumulated distance between GPS coordinates to be
calculated from a GPS sensor.
Name
The sensor name, which may be edited.
Unit
The measurement may be in cm, meters or feet.
Decimals
The display may be to 0, 1, 2 or 3 decimals.
Range
The range may be from 0 up to a maximum of 10km.
Write Logs
Logs will be written to the SD card in the Logs folder if enabled.
Source
After discovering sensors, select your GPS sensor.
Persistent
Persistent allows storing the sensor value in memory when the radio is powered
off or model is changed, and will be reloaded next time the model is used.
Reset
Allows the sensor to be reset.
To Next Page
Loading...
