Operations during Faxing
107
Fax
4
2 Select the job to cancel, and then
select [Cancel].
Changing the Scan Settings
You can change the scan settings while scanning the document.
1 Select [Next Original].
2 Select [Change Settings...].
3 Set [Resolution], [Original Size], and [Lighten/Darken].
For each setting, refer to "Resolution (Specifying the Scanning Resolution)" (P.124), "Original Size
(Specifying the Scan Size for the Original)" (P.126), or "Lighten/Darken (Adjusting Density Level)"
(P.122).
4 Press the <Start> button.