Facsimile Information Services
163
Fax
4
When Not Using a Receiver
1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "Line Monitor Volume"
(P.277)
2 Select [On-hook (Manual Send/
Receive)] on the [Advanced
Features] screen.
3 Select [Manual Receive] from the
drop-down menu.
4 Specify the fax number of the facsimile information service.
z
The call destination can be specified using the numeric keypad address numbers, or
one touch buttons. The address book cannot be used.
z
The call destination can also be specified using the keyboard displayed on the
screen.
Note • When the line type is set to a pulse line, [Tone (:)] does not appear.
• If you want to send tones (or to use the touch-tone services) while using a pulse line, select
[Tone (:)].
• Some touch-tone services may not be available even if you set your telephone to send
tones.
5 When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6 When input is finished, press the <Start> button.
To Next Page
Loading...
